[1]李瑞豐.生產測井組合儀在氣井產出剖面評價中的應用[J].石油管材與儀器,2019,5(05):49-54.[doi:10.19459/j.cnki.61-1500/te.2019.05.012]
 LI Ruifeng.Application of Production Logging Tool in Evaluation of Gas Well Production Profile[J].Petroleum Tubular Goods & Instruments,2019,5(05):49-54.[doi:10.19459/j.cnki.61-1500/te.2019.05.012]
點擊復制

生產測井組合儀在氣井產出剖面評價中的應用
分享到:

《石油管材與儀器》[ISSN:2096-0077/CN:61-1500/TE]

卷:
5
期數:
2019年05期
頁碼:
49-54
欄目:
儀器設備與應用
出版日期:
2019-10-20

文章信息/Info

Title:
Application of Production Logging Tool in Evaluation of Gas Well Production Profile
文章編號:
2096-0077(2019)05--0049-06
作者:
李瑞豐
大慶油田有限責任公司測試技術服務分公司 黑龍江 大慶 163453
Author(s):
LI Ruifeng
Logging and Testing Services Company,Daqing Oilfield Co.Ltd., Daqing, Heilongjiang 163453, China
關鍵詞:
生產測井組合儀測井產氣剖面測井解釋
Keywords:
production logging toollogginggas production profile logginginterpretation
分類號:
P631.8+1
DOI:
10.19459/j.cnki.61-1500/te.2019.05.012
文獻標志碼:
A
摘要:
生產測井組合儀主要用于常規產出和注入剖面測井,但在產氣剖面分層測試中,深層氣井、二氧化碳產出井等特殊井沒有應用過生產測井組合儀。應用生產測井組合儀在深層氣井、水平產氣井進行了測試,通過綜合解釋不僅獲得了產氣剖面,還確定了各段主次產層,并且測試結果與實際試氣結果對應較好,驗證了生產測井組合儀在深層氣井、水平產氣井評價方面的可靠性;同時提出了應用生產測井組合儀評價二氧化碳產出井的方法,并將測試結果與氧活化測試結果及井口計量產量進行了對比,證明了應用生產測井組合儀評價二氧化碳產出井的可行性。拓展了生產測井組合儀
Abstract:
Production logging tool (PLT) is primarily used for conventional production and injection profile logging. But for gas production profile loggings, there are no such applications for some special wells such as deep gas wells and carbon dioxide output wells. Logging in the deep gas wells and horizontal gas wells with production logging tool not only can provide gas production profile but also can determine the primary and secondary reservoirs by comprehensive interpretation. The logging results and the actual testing results have a good correspondence, thus verifies the reliability of the production logging tools in the deep gas well and horizontal gas well production evaluations. Meanwhile a method of using production logging tools to evaluate carbon dioxide output wells is put forward. Comparing the logging results with the oxygen activation logging results and the metering yield at the wellhead proves the feasibility of using production logging tools to evaluate the carbon dioxide output wells. Thus the application range of the PLT in gas well production profile tests can be widened greatly.

參考文獻/References:

[1] 譚廷棟.生產測井資料解釋方法[M]. 北京 :石油工業出版社,1995:18-19.
[2] 肖承文,柳先遠,張璋,等.音叉密度計在塔里木高壓氣田的應用[J].測井技術,2016,40(3):348-351.
[3] 姚亞彬,李震,蘇波,等.音叉密度計在克拉2氣田的應用[J].石油儀器,2014,28(2):31-33.
[4] 馬鵬程.產氣剖面測井技術在大慶油田的應用[J]. 石油儀器,2012,26(1):58-60,63.
[5] 劉晶晶.生產測井組合儀在氣舉找水中的應用[J]. 石油管材與儀器,2016,2(4):72-75.
[6] 張耀文,鄒長春,顧偉康,等.PLT測井在蘇丹穆格萊德油田的應用[J]. 國外測井技術,2008,29(3):21-23.
[7] 郭海敏,戴家才,陳科貴.生產測井原理與資料解釋[M]. 北京:石油工業出版社,2007:209-212.
[8] 喬賀堂.生產測井原理及資料解釋[M]. 北京:石油工業出版社,1992:108-111.
[9] 王海柱,沈忠厚,李根生,等.CO2氣體物性參數精確計算方法研究[J]. 石油鉆采工藝,2011,33(5):65-67.
[10] 徐海濤,肖勇,劉興斌.氧活化測井技術在二氧化碳吸氣剖面中的新應用[J]. 石油儀器,2011,25(5):42-45,48.
[11] 姜岳慶,王寧.能譜水流測井儀與生產測井組合儀組合測井的實現和應用[J]. 石油儀器,2011,25(5):25-27.
[12] 齊占奎.二氧化碳驅注入剖面氧活化測試技術和現場試驗[J]. 石油管材與儀器,2016,2(6):63-66.
[13] 吳錫令.石油開發測井原理[M]. 北京 :高等教育出版社,2004:27-28.

相似文獻/References:

[1]張文博,康松豪.IKZ-2型俄羅斯感應測井儀刻度方法研究[J].石油管材與儀器,2016,(01):53.
 ZHANG Wenbo,KANG Songhao.Study Calibration Method of Russian Induction Logging Tool of IKZ—2[J].Petroleum Tubular Goods & Instruments,2016,(05):53.
[2]楊陸,張光洲,高君恒,等.智能手機模擬測井深度信號的原理及實現[J].石油管材與儀器,2016,(06):31.
 YANG Lu,ZHANG Guangzhou,GAO Junheng,et al.Principle and Implementation of Simulating the Well Logging Depth Signal by Using Smartphone[J].Petroleum Tubular Goods & Instruments,2016,(05):31.
[3]朱立新.電動導入式打撈器的設計與應用[J].石油管材與儀器,2017,3(04):11.[doi:10.19459/j.cnki.61-1500/te.2017.04.003]
 ZHU Lixin.Design and Application of Electric Imported Type Fisher[J].Petroleum Tubular Goods & Instruments,2017,3(05):11.[doi:10.19459/j.cnki.61-1500/te.2017.04.003]
[4]張自成.基于熱示蹤的流量測量實驗研究[J].石油管材與儀器,2017,3(04):41.[doi:10.19459/j.cnki.61-1500/te.2017.04.010]
 ZHANG Zicheng.Experimental Study on Flowrate Measurement Based on Thermal Tracing[J].Petroleum Tubular Goods & Instruments,2017,3(05):41.[doi:10.19459/j.cnki.61-1500/te.2017.04.010]
[5]張必波,孫剛,王振.一種伸縮測量裝置的研制[J].石油管材與儀器,2017,3(06):26.[doi:10.19459/j.cnki.61-1500/te.2017.06.007]
 ZHANG Bibo,SUN Gang,WANG Zhen.Development of a Measuring Tool for Flex Quantity[J].Petroleum Tubular Goods & Instruments,2017,3(05):26.[doi:10.19459/j.cnki.61-1500/te.2017.06.007]
[6]朱立新.一種新型測井釋放器的設計與應用[J].石油管材與儀器,2018,4(06):13.[doi:10.19459/j.cnki.61-1500/te.2018.06.004]
 ZHU Lixin.Design and Application of A New Type of Logging Releaser[J].Petroleum Tubular Goods & Instruments,2018,4(05):13.[doi:10.19459/j.cnki.61-1500/te.2018.06.004]
[7]滕學清,朱金智,呂拴錄,等.哈13-12井套管在固井過程中斷裂原因分析[J].石油管材與儀器,2019,5(04):70.[doi:10.19459/j.cnki.61-1500/te.2019.04.017]
 TENG Xueqing,ZHU Jinzhi,LYU Shuanlu,et al.Cause Analysis on Casing Fracture During Cementation in Well HA13-12[J].Petroleum Tubular Goods & Instruments,2019,5(05):70.[doi:10.19459/j.cnki.61-1500/te.2019.04.017]
[8]劉書濤,孫旭政.BDS連續測斜儀原理及常見故障分析[J].石油管材與儀器,2019,5(05):98.[doi:10.19459/j.cnki.61-1500/te.2019.05.021]
 LIU Shutao,SUN Xuzheng.Instrument Principle and Common Fault Analysis of BDS Continuous Inclinometer[J].Petroleum Tubular Goods & Instruments,2019,5(05):98.[doi:10.19459/j.cnki.61-1500/te.2019.05.021]
[9]葛明君,呂拴錄,謝俊峰,等.某油井在固井過程中套管斷裂原因分析[J].石油管材與儀器,2020,6(01):65.[doi:10.19459/j.cnki.61-1500/te.2020.01.016]
 GE Mingjun,LYU Shuanlu,XIE Junfeng,et al.Cause Analysis of Casing Fracture in the Process of Cementing in an Oil Well[J].Petroleum Tubular Goods & Instruments,2020,6(05):65.[doi:10.19459/j.cnki.61-1500/te.2020.01.016]

備注/Memo

備注/Memo:
第一作者簡介:李瑞豐,男,1971年生,高級工程師,1995年大慶石油學院測井專業畢業,現主要從事測井資料解釋工作。E-mail:[email protected]
更新日期/Last Update: 2019-10-25
pc蛋蛋官网 哈皮河南麻将安卓版 什么股票下午大跌 大类配资 股票短线买卖技巧 辉煌棋牌网址是什么 重庆快乐10分预测推荐 新疆11选5网址 辽宁11选5交流群 街机金蟾捕鱼官方版 最多人玩的棋牌? 娱网棋牌充值 大发快3一分钟走势 辽宁快乐12前三走 秒速牛牛怎么看走势 浙江20选5开奖 博牛宝沪深策略